Motor series

Needle positioner for Industrial Sewing Machine

FEATURES

* Low niose serves comfortable environment.

* Back ward turning is possible after trimming.

* Torque:0.18kg.m/1.7Nt-M

* Max.Speed: 3000 r.p.m.

Voltage Ranges
HVP-58
1 100-120V
1 /3 200-240V
HCB-43
1 100-120V
1 /3 200-240V
3 380-440V
1100-120/200-240V
3 200-240/380-440V

 

* Non-contact clutch with maintenance free

* Full digital control for easy service.

* Lowest cost to get full function.

* Available for wide range power source.

Model Code

 

Operation Box
C-4N
* Dimension:172x62x40mm
* Basic and Economic but Enough
* Start/End Backtacking can beset in 1-9 stitches.
* Straight Sewing can be counted in 99 stitches.
C-10
* Dimension: 230x65x29mm
* Programmable Backtacking and Straight Sewing.
* 9 patterns can be set and memorized.
C-100
* Dimension: 230x65x30mm
* With total 41 parameters can be programmed.
* Functions are clearly and quickly displayed on the LCD.
* Local language is available upon the customer's request.

 

Mounting Bracket for Operation Box
Automatic
Standing Operation Pedal
 * Smoothly speed changes from low to high.
* Three pedals for Speed, Trimmer and Foot Lifter.
* Licensed by Mitsubishi Electric Co.
Venturi Device
FOR OVER LOCK CHAIN CUTTER

 

Basic Functions

   HVP-58-O HVP-58-1
HCB-41 		HVP-58-2
HCB-42		 HVP-58-3
HCB-43		 HVP-58-4
HCB-45		 HVP-58-5 HVP-58-6
Needle Up/Down Ął Ął Ął
Presser Foot Lifter   Ął Ął
Slow Start Ął Ął Ął
Correct/Needle Up        
Under Bed Trimmer & Wiper          
Back Tacking Stitch Balance            
Automatic Back Tacking            
Standing Operation Ął Ął Ął Ął Ął Ął  
Wiper NO/OFF Switch     Ął Ął Ął
Super High Speed Ął       Ął Ął
Turn Back Stop Ął Ął Ął Ął Ął Ął Ął
Upper Trimmer & Wiper         Ął Ął
Safety Switch         Ął Ął
Heming Guide Function           Ął
Air Vacuum Signal         Ął Ął
Trimming Cancel         Ął Ął
Condensed Stitching           Ął  
Operation Box C-4N/C-10       Option      
Operation Box C-100       Ął Option      
Meterial Edge Sensor             Ął
HCB-and-HVP - series are available.
Only For HCB - series.
ĄłOnly For HVP - series.

Additional Functions
*A lot of operating parameters can be programmed by only plugging in the operation Box C-100.
*It's possible to offer some special functions upon customer's request.

 

New Woosun Trading Co., Ltd.
No.31, Lane 161, Sin Sheng S. Rd., Sec. 1, Taipei, Taiwan
TELĄG886-2-27049590     FAXĄG886-2-27005710
http://www.woosun.com.tw
mail@www.woosun.com.tw

Copyright © 1999 New Woosun Trading Co., Ltd.